birth

It appears you have not registered with our community. To register please click here ...

Recent Posts

Pages: 1 ... 8 9 [10]
91
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 27, 2016, 07:57:49 PM »
Whatever...  There may be some who can be helped by my thread instead you troll me.  We are ok with that here.   :afit:

Here is the status.
SST Brakes lines are installed.
There was a leak with the power steering had to replace the Electronic Variable Orifice (EVO) valve o-rings.  Will have lots of spares if you need any.
ABS Issue persisted but was fixed:  The relays were swapped and there were several wires that needed to be replaced.  After all that the ABS threw code 36 and the wheel sensor is on order.
The car should be DONE this week!

That was a ton of work to make the 1990 reliable.
 :P
92
Auto Tech / Re: 2016 XR7 Project
« Last post by FASTFREDDIE on September 23, 2016, 11:28:37 AM »
 3 MRE SHOWS WILL BE DONE    LEFT AS A WINNER SO U CAN,T BEAT ME IN 50 YEARS
93
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 22, 2016, 07:31:04 PM »
:freddie: is scared...  :surr:
94
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 21, 2016, 07:05:23 PM »
Better quit now.  Next year you will be second fiddle!!
 O0
95
Auto Tech / Re: 2016 XR7 Project
« Last post by FASTFREDDIE on September 19, 2016, 03:58:17 PM »
 UR RITE I CAN,T PAY SOMEBODY 2 DO MY CARS :o :'(      I JUST DO MY OWN WORK :afto2: :) ;) :D ;D  AND MY OLD AGE IS WEARING ME DOWN  :pilot: :-[ :surr:  I, LL QUIT WHILE I,M A WINNER :first: :second: :Third: :meeting: :bow1: :king: :clap: :clap: :clap: :clap:
96
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 11, 2016, 07:38:44 PM »
Me never trailer my car.  You are quitting because you know you can not compete!   
 :hide:
97
Auto Tech / Re: 2016 XR7 Project
« Last post by FASTFREDDIE on September 09, 2016, 09:12:21 AM »
 NEXT U,LL B TRAILING IT 2 SHOWS :afto2: :) ;) :D ;D  U GOT OUT OF CONTROL :'( ^-^ :doh: :afit: :naww: :nono: :lunie: :wacko: :pilot: GLAD NEXT YEAR I,M DONE  COULDN,T STAND BEING AROUND A PRIMA DONNA  :surr: :surr: :surr:
98
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 05, 2016, 07:53:13 PM »
Here are the exhaust tips:


New calipers installed and painted RED!  Plust, the bottom of the car was ground and rust proofed three times then finally painted black!









Now all that is left is to bleed, test and drive!

I will take care of the rotors over the winter!
99
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 05, 2016, 07:47:07 PM »
Everything was tacked...  Welded... and inspected...




100
Auto Tech / Re: 2016 XR7 Project
« Last post by J dot Miller on September 05, 2016, 07:43:51 PM »
This is the work I did the other year...


The 2.5" Dual exhaust was clamped in place...






Supports were fabricated...



Pages: 1 ... 8 9 [10]