Well tstat and i start doing some of the projects on the cougar. Last year we lowered the cougar 3/4" put new addemco sway bars. Last month we rebuilt the front end completely and did the hub swap from 4 1/4" to the mustang hubs which are 4 1/2" bolt pattern. Replace all the brake flex lines with braided stainless steel line removed all the calipers and installed 03 cobra calipers and slotted rotor. Out next project is the rearend. I purchased a subframe from a 98 mark viii which will be boxed and rendforced and the pinion will be replaced with 3:73 gear set and the subframe will be powder coated. This will happen over the winter and installed in the spring. Still thinking on what type of tranny to use.