+ High Performance RevMax Torque Converters birth

It appears you have not registered with our community. To register please click here ...

Author Topic: High Performance RevMax Torque Converters  (Read 1253 times)

Joe H

  • Street Racer
  • ***
  • Posts: 212
  • Karma: 11
Re: High Performance RevMax Torque Converters
« Reply #15 on: December 05, 2013, 11:14:29 PM »
 :zipp:


okay !
I found my receipt and spec sheet on my REVMAX TORQUE CONVERTER :happy:


Be jealous lil dogs be jealous  :own:



91/2 Stage 3 BILLET
Performance Rated up to 500HP
2800-5500 Stall
4130 Chrome Moly Flanged Impeller Hub
Precision Laser Cut Mounting Ring with .003 or Less Flatness
4340 Precision Pilot
4340 Hardened Turbine Hub and Splines
Torrington High Performance Bearings
High Performance Max STR Torque Stator Sprag Assembly
Nearly 20lbs lighter than a factory 12 inch T.Q.
 Computer Balanced to less than 3 grams
Runout Tolerance Under .005

Gave me some free upgrades simply because I promised if things went well I'd pass the word along:

ANTI BALLOON PLATE UPGRADE
8 FOLD ACCORDION SPRING UPGRADE
WOVEN CARBON FIBER LOCKUP CLUTCH UPGRADE


 $499.00


Freight was 25.

J dot Miller

  • Show Car
  • Nascar
  • ***
  • Posts: 3842
  • Karma: 104
    • The Cougar Roar!
Re: High Performance RevMax Torque Converters
« Reply #16 on: December 07, 2013, 09:24:56 AM »
What a good deal!
 :gdpst:
The 5.4 swap has been called a bad idea, and considered an underpowered considerable waste of time, since 2007.

Nice to see that most donít think that anymore.
Bondfreak13 07/28/09 09:05 PM

J dot Miller

  • Show Car
  • Nascar
  • ***
  • Posts: 3842
  • Karma: 104
    • The Cougar Roar!
Re: High Performance RevMax Torque Converters
« Reply #17 on: December 11, 2013, 08:06:11 PM »
Ooosing like a bad case of diareara!  It is so funny how he makes the same argument against all those who question him...

Quote from: Dirtyd0g;1055745
So besides saying give me money, give me money what attempts did you make to give me a chance to correct the problem? I also noticed that you made no mention that you did get your refund as promised once you sent me my parts, that you never would have sent me if you didn't have a financial reason to do so.
Make me out to be the aggressor and harrassor all you want but I bet you can not find one person who will say I never offered to help them if the car came to me, I told you the very same thing but with you anything not in writing is ignored. Just like the agreement to return the parts.
At this point I don't believe a word you say, I spent hours on the phone with you before and after the sale going over all this stuff repeatedly. When it comes to you trying to make me look bad for not giving you a free transmission you will say anything.
 :bthrm:


A lesson to be learned.  Put everything in writing when placing an order.  Do not deal with the shady side of the internet where ::dog:: resides...  Get a reputable brand like Revmax!
The 5.4 swap has been called a bad idea, and considered an underpowered considerable waste of time, since 2007.

Nice to see that most donít think that anymore.
Bondfreak13 07/28/09 09:05 PM

Joe H

  • Street Racer
  • ***
  • Posts: 212
  • Karma: 11
Re: High Performance RevMax Torque Converters
« Reply #18 on: December 12, 2013, 05:35:15 AM »
so in other words.....................if the car shows up at my door on a hook of a tow truck then I guess I have to fix it otherwise :  >>> F.YOU !


too Mickey Mouse for me


He should refuse all long distance work if he has problems believing people

He could mark his parts with I.D. numbers
They make special markers/ink/paint for this.

Like I said earlier its hard for a little operation to compete and then if they have to warranty something ,,,,,,,,,,,,,,it hurts them much more than a large outfit.

I'll stick with large reputable outfits when spending large amounts of my hard to get cash

I've been chit on enough in my lifetime :porain:

I'd probably lose it if someone talked to me like that after they ripped me off.  :boom::shotgun::boom:
« Last Edit: December 12, 2013, 05:46:53 AM by Joe H »